Blinking red: Your battery is empty or has less than 10% charge. Solid red: Your battery’s charge level is between “almost empty” and about 2/3 charged. We recommend that you continue charging. Solid green: Your battery is almost fully charged.
Contents
Vape pen blinking red? time to charge. When you draw on your vape and see a flashing red light, it means it’s time to charge your battery. It is important to charge at the correct voltage rated for your vape battery.
Clean it
If you are sure you are using the correct charging source but are still having a problem charging your vape battery, check the interface between the device and the charger works free of dirt. Blow gently into the charger from the bottom of the device to remove obstacles.
If the vape pen is short-circuited or the vape pen is puffed for more than five seconds, the LED light on the Vuse ePod 2 vape pen will flash three times and the vape pen will shut down .
If your Vuse Vibe isn’t producing vapor or doesn’t seem to be working, try the following: Charge the battery. Change the pre-filled tank. Clean the connection between the battery and the tank by unscrewing the tank from the battery and wiping the connecting parts with a slightly damp cotton swab.
Resistance protection: When the atomizer resistance is below 0.1ohm or above 2.5ohm, the LED light will flash 4 times and the battery will automatically cut off the output.
A flashing light on your Vuse Alto means your battery is low. Load it up! But you don’t have to let charging slow you down – just plug in the charger and you’re good to go. Vuse Alto technology lets you vape while it’s plugged in.
In the center of the Vuse Alto battery is a green LED that flashes 10 times when the battery needs to be charged. To charge the Vuse Alto battery, place the bottom of the device within the magnetic charging port on the charging cable and connect the USB cable to a computer.
How long does the ePod 2 pod device last? A regularly used and maintained Vuse ePod is designed to last at least twelve months, depending on vaping behavior. After 12 months, battery performance degrades due to frequent charging (which is common for all lithium-ion batteries).
Certain batteries will flash 3 times indicating a short circuit. Most standard e-cigarette batteries have something called short-circuit protection. So if a short occurs and you press the fire button, it only blinks 3 times and then does nothing.
The CHARGE light may blink for the following reasons: The ambient temperature is too low to charge the battery. The battery has not been used for a long time. The connection between the battery and the charger is bad.
When charging is complete, the LED on the bottom of the Vibe battery will glow solid white. It takes about 90 minutes to charge the device from a fully discharged state.
The three products Vuse Ciro, Solo and Vibe are all charged in a similar way. When it’s time to charge, your pen will flash red three times to indicate that the battery is empty. To get it working again, simply plug your battery into the included charger and the other end into any USB port.
Latest Questions
© 2022 intecexpo.com
We use cookies to ensure that we give you the best experience on our website.