Disable MAC filtering (enabled by default) and try connecting again. If the above procedure doesn’t work, you’ll need to try to obtain an IP address manually. Turn off your PS3 and unplug both your cable modem and wireless router.
Router/Access Point Problem
If no one can connect to the Internet, you need to troubleshoot the router or access point. First try to restart the router or access point. Make sure you turn it off for at least 30 seconds. This will reset all caches, resulting in a fresh start.
The WPA key is a method of securing wireless networks. This setting is not dependent on your PS3 but on your wireless router. If you’re not using a wireless router, this setting doesn’t apply to you. You need to log in to your router settings.
A WPA key is a password that you use to connect to a wireless network. You can get the WPA password from whoever runs the network. In some cases, a standard WPA passphrase or password can be printed on a wireless router. If you can’t figure out the password on your router, you may be able to reset it.
Find your wireless network name (SSID) and your WPA key (your password). You can usually find this information on the back of your router.
< li>Run Power Cycles.
The “Wireless adapter or access point problem” is an error that you may encounter in Windows 10 in the Network Diagnostics window. What is that? report ad. If you see this message, it means that Your Windows computer or device couldn’t connect to the internet because of a problem with the wireless adapter.
If the LCD shows No Access Point, the device has not detected your access point/router on your network when Wi-Fi Protected Setup mode or AOSS™ mode is enabled. Move the device closer to your access point/router and try starting from STEP 2 again.
Cause of Android error “Could not get IP address”
The most common source of error is a router problem. Either your device was blocked on purpose or the connection problem is due to a router problem. It’s also possible that your Android device’s network hardware or software is malfunctioning or damaged.
The WEP key or the pre-shared WPA/WPA2 key/passphrase is not the same as the access point password. With the password you can access the settings of the access point. The WEP key or pre-shared WPA/WPA2 key/passphrase allows printers and computers to connect to your wireless network.
You can usually find the WEP key on the Security tab in your wireless router’s settings. Once you know the WEP key, you’ll need to enter it when prompted. In some cases this may be all the manual information required.
Select (Settings) > (network settings). 4. Select [Internet Connection Settings]. Select [Yes] when a confirmation screen appears stating that you will be disconnected from the Internet.
Android. From the Apps menu, select “Settings”. Select “Wi-Fi”. In the list of networks, look for the network name next to “Connected”. This is your network’s SSID.