What Is Dexron Vi Compatible With?

FAQs Jackson Bowman November 4, 2022

GM considers Dexron VI to be “backwards compatible,” meaning that GM recommends it for use in any vehicle that originally used an earlier version of Dexron and that it can be mixed with it . However, GM strongly discourages the use of Dexron VI in non-GM vehicles that used Dexron III as original equipment.

What transmission fluid is compatible with dexron VI?

DEXRON-VI can be used instead of DEXRON-III in vehicles of earlier models with automatic transmission in any proportion (e.g. to top up the fluid in case of repair or fluid change). DEXRON-VI is also compatible with all previous versions of DEXRON for use in automatic transmissions.

What is dexron VI used for?

The Pinnacle Oil Difference

DEXRON® VI is a high performance automatic transmission fluid approved by General Motors. It is formulated to meet the stringent viscometric, friction, wear and oxidation stability properties required in passenger car and light truck transmissions.

Is dexron VI the same as ATF?

DEXRON VI/MERCON LV (ATF) Fully synthetic automatic transmission fluid. Valvoline Dexron VI/Mercon LV ATF is the fully synthetic automatic transmission fluid specifically formulated to meet and exceed the requirements of General Motors’ Dexron VI specification and is officially licensed and approved by GM.

Are all dexron fluids compatible?

Yes, DEXRON VI oil can be used in any vehicle type that requires DEXRON gear oil.

Is Mercon V same as DEXRON VI?

This fluid technology was developed to replace and supersede previous generation GM and Ford specifications such as the DEXRON III and MERCON/MERCON V. General Motors officially states that DEXRON® VI approved fluids are backwards compatible with and should replace all previous generation DEXRON fluids in the field.

What happens if you mix different types of transmission fluid?

The most common situation where the wrong transmission fluid is used is when using automatic transmission fluid instead of variable transmission fluid and vice versa. Adding ATF to a CVT will eventually result in the death of your transmission.

Is DEXRON vi full synthetic?

DESCRIPTION: ACDelco DEXRON-VI ATF is a high-performance, synthetic blend formulation that meets or exceeds the stringent requirements of GM’s DEXRON-VI specification and provides warranty protection for current GM vehicles. It also offers improved performance in older GM vehicles wherever DEXRON is specified.

Can I use DEXRON VI for power steering fluid?

The service manual says “ATF Dexron III or equivalent”. Dexron VI should be backward compatible with Dexron III. Dexron IV was only briefly marketed by GM and I would assume it is backwards compatible with III. I only use the Subaru ATF HP for the power steering (and transmission).

Can you mix regular transmission fluid with synthetic fluid?

Is it ok to mix synthetic ATF with a conventional and/or synthetic blend ATF? Yes. Synthetic ATF and conventional fluids are 100 percent compatible.

Is dexron and mercon the same?

ISO Grade 32 Automatic Transmission Fluid

Dexron III is a General Motors brand of qualified automatic transmission fluid. Mercon covers all automatic transmissions for Ford from model year 1988. LUBRIPLATE Dexron III/Mercon is intended as a refill and/or refill fluid to meet applicable vehicle warranties.

What’s the difference between ATF and dexron?

DEXRON is the trade name for a group of technical specifications for Automatic Transmission Fluids (ATF) prepared by General Motors (GM).

What is equivalent to dexron ATF?

The most common names are Dexron, Mercon and ATF+4, which are trademarks of General Motors, Ford and Chrysler respectively.

Can I mix different brands of transmission fluid?

Yes. Synthetic ATF and conventional fluids are 100 percent compatible.

Can I use Dex Merc instead of DEXRON VI?

Dex/Merc would be fine. Dexron VI is listed by GM as backward compatible but is thinner than the original Dexron III. I would use the Dex/Merc myself.

What year did DEXRON VI come out?

Dexron-VI: Introduced in 2006 for GM Hydra-Matic 6L80 6-speed rear wheel drive transmissions. Dexron VI replaced Dexron II and III and can be used in General Motors domestically built or imported transmissions that specified Dexron II or Dexron III.

Can you use Mercon LV in place of DEXRON VI?

Advantage® Uni-Syn LV DEXRON® VI/MERCON® LV ATF is designed to meet the needs of most modern transmissions on today’s road and is also backward compatible with older GM Dexron specifications, making it the perfect premium product to optimize your transmission makes liquid offerings.

What transmission fluid does Ford recommend?

MERCON® Fluids are the only fluids approved by Ford Motor Company for their recommended application. The various MERCON® fluids are unique fluids formulated for specific applications. Their specifications DO NOT overlap and use of fluids other than those specified may result in reduced functionality or damage to the transmission.

What transmission fluid is compatible with Mercon V?

The following applications are strongly recommended: Ford Mercon V and Mercon; Dexron-II and Dexron-III; bead TO-2; Allison C-4; and some power steering fluid applications. Mercon V is also backward compatible with Mercon and can be used in Mercon applications.

Can the wrong transmission fluid cause problems?

Using the wrong fluid can lead to poor lubrication, overheating and possible gear failure. A mechanic may not be able to reverse the damage even if they flush the transmission. Accidentally topping up engine oil or brake fluid can also destroy your transmission.



© 2023

We use cookies to ensure that we give you the best experience on our website.
Privacy Policy