The “Check Gauges” light on your dashboard means that at least one of your vehicle’s gauges is out of range. Typically, the affected indicator will light up along with this warning. Fixing the problem includes simple to complex solutions – depending on how well you have taken care of your vehicle.
The gauges in a car are diagnostic tools that the car uses to display information about its various systems. Gauges are usually displayed on your car’s dashboard behind the steering wheel. The gauges in a car help identify fluctuations or problems before they cause serious damage.
The “Check Gauges” light means just that. Look at all the gauges while the engine is running and see which one is not within the normal range. Gas gauge doesn’t matter. The temp gauge should be about 195 degrees, the voltage should be about 14 volts and the oil pressure at idle is about 40psi.
The check indicator indicates that something may be wrong with the operation of the gauges or the components that provide information to the gauges. For example, if you have an actual engine oil pressure problem that is causing the gauge to fluctuate, the warning light will illuminate.
The check engine light is a signal that the onboard diagnostics (or OBD II) has detected a malfunction in the vehicle’s emissions, ignition, fuel or emissions systems.
There are 3 different categories of warning lights; Red, Yellow and Green: Red warning lights mean you should stop the car as soon as it is safe. Yellow warning lights mean action is required. Green warning lights are for information only.
No. Driving with low oil pressure or too little oil in the system can ruin the vehicle’s engine and completely damage the engine. If you notice the oil warning light coming on while driving or while the car is running, you should stop driving and have this problem rectified as soon as possible.
It depends on what turned off the check gauges light. If the problem is that the washer fluid level is too low, there is no immediate danger if you continue driving – provided that all vehicle systems are still working properly. Otherwise, it’s best to stop and investigate what triggered the alert as soon as possible. What is this?
The oil pressure gauge usually drops when a few things could happen. Either the engine actually has too little oil, the oil pump could be defective or the oil pressure transmitter unit is not working properly and may display an incorrect reading.
A defective oxygen sensor will return an engine check warning every time. In fact, this is one of the most common reasons a check engine light comes on while you’re driving your car.
This is a sign that you should stop driving and have your car checked by a mechanic as soon as possible. Use your best judgment to decide whether to call a tow truck or drive to a nearby repair shop yourself.
The “Check Engine” light is the way the on-board diagnostic system lets you know something is wrong. But that something could be one of many things, big or small. It could pop open because of something small like a loose or broken gas cap. It could also mean major engine damage.
Stuck Throttle Body
A dirty throttle body can sometimes become stuck or damaged and when it does the system may report an ETC fault by illuminating the red lightning bolt icon on your Jeep dashboard. A visual and mechanical inspection will help you determine if the throttle body is working as it should.
What are the three most important metrics or indicators to look at? Coolant temperature gauge, oil pressure gauge and battery voltage gauge.
The transmission warning light is illuminated when there are internal transmission problems. The problems can be a higher than normal temperature in the transmission oil, transmission problems, programming problems or other problems.