If your power cord is plugged in but the GameCube won’t boot, unplug the power cord from the back of the GameCube. Check the connector to see if it’s dusty or dirty. If this is the case, gently blow on the area to dislodge the dust and reconnect the power cord.
You can try cleaning the disc again with a soft, slightly damp cotton cloth (use only water). Clean the disc from the center to the edges; Don’t use circular motions. DO NOT use paper. Make sure the game is dry, then put it back in and see if the error comes back.
The GameCube is Nintendo’s fourth console gaming system. The repair is easy and requires only common tools.
Remove the connectors and reinsert them with a slight twisting motion. Make sure you plug the yellow cable into the video input. Also make sure your audio cables (red and/or white) are connected to the audio input jacks on your TV or VCR. Remove the plugs and plug them back in with a slight twisting motion.
Always make sure that the Nintendo GameCube is placed in such a way that the ventilation slots are not blocked and thus ensure good ventilation. There should be no other electrical devices that give off heat in the immediate vicinity. The device has thermal protection.
Steel 4.5mm Screwdriver Security Bit Open SNES N64 GameCube Game Consoles + Genesis Master System Games.
Manufacturer’s warranty: 3 months. MSRP: $34.95.
If you have an old Nintendo GameCube, you’re in luck! With the right adapters, you can connect it to any modern TV. Originally, Nintendo included an analog TV broadcast adapter with the GameCube so people could connect it to any TV at the time.