Press the left arrow button once to highlight the logo and channel number of the channel you wish to unblock. Press the OK button. Use the right arrow key to highlight Unlock. Press the OK button.
Yes, all you pay for is the rental of the box, not the service associated with it. The house is already piped with service.
Make sure you’ve tightened all the cable connections from the wall to your device, turned on your TV and TV box, checked your remote control batteries, and set your TV to the correct input. If none of these worked, tap Next. We scan your device for possible problems. Choose a system update or restart a single TV box.
Sometimes the box may hang during the boot process. It’s a good idea to restart the process one more time to see if things are back on track. Simply unplug the power cord from the box and plug it back into the outlet. Now make sure the cables are rerouted and properly secured before restarting.
Locate the reset button and power connector/button. Hold down the reset button and plug in the box to turn it on (sometimes the power button is used). Press and hold the reset button for 10 seconds and then release it. The box should come into recovery mode with several options.
If the location you are moving the box to has the same exact identical channel lineup from 2 to 999, from the same company using the same branded set top boxes, then it should work . But a system with the same lineup is usually the size of a district or two, not much more.
Yes, your Smart TV works without an internet connection. You can watch TV channels with a cable box or antenna, connect Blu-ray/DVD players, connect speakers, etc. – just like a regular TV. However, you cannot use any of the included video streaming apps.
Yes, the Wireless TV Box can be placed anywhere it can maintain a wireless connection to your Wireless Gateway, such as in a closet or behind a television, although you should always ensure that it is is well ventilated. The Xfinity Voice Remote supplied with the Wireless TV Box does not require line of sight to the box.
Make sure your cables are securely fastened. Press and hold the power button on the front of the TV box for 10 seconds. The TV box should restart automatically.
Open the Xfinity My Account app (available on Apple and Android devices). Scroll down and select the Internet tile. < b>Choose your modem and then restart this device (this may take up to seven minutes).
First, check that your TV is set to the correct source or input, try changing the source or input to AV, TV, Digital TV or DTV if so you have not already done so. If your “No Signal” message isn’t due to an incorrect source or input being selected, it’s most likely caused by a setup or antenna error.
To start, select “Menu” and then “Settings” on your TV remote control. Next, select “Channel Setup” and choose “Antenna” or “Air” depending on your TV. Make sure you’re not set to Wired. Select “Channel Search” or “Channel Search”.
Fortunately you can easily double or even triple the capacity of your DVR by adding more hard drive space. Note that the cable company can fine you if you mess around with it since you don’t own the box.