< li>Select the Restore Defaults button and press OK.
With the printer turned on, unplug the power cord from the back of the device. Unplug the power cord from the electrical outlet. Wait at least 15 seconds. Plug the power cord back into the outlet.
With the printer turned on, press the Wi-Fi button and the Cancel button at the same time. This will put your HP printer into setup mode. Download the HP Smart app on your Android device or iPhone to complete the password change process. From the HP Smart app, select Printer Setup. ”
Press and hold the wireless button and the cancel button for five seconds. Wait for the printer to restart and the wireless light to blink. Return to the app or software within two hours to find your printer, add it, and complete setup.
With the printer turned on, unplug the power cord from the back of the printer and also unplug the power cord from the electrical outlet. Remove USB cable if present. Wait 2-3 minutes and hold down your printer’s power button for about 30 seconds to remove extra charge.
To resolve most print quality issues, use genuine HP cartridges, and in some cases you may need to allow the printer to complete the automatic maintenance routine. Check the paper and print settings to make sure they are appropriate for the print job, and clean the cartridges and printhead.
For HP printers, a “cold reset” results in the printer returning to its factory default settings, which, among other things, causes it to attempt to retrieve its configuration information from a BOOTP server .< /p>
Common factors include driver issues, software issues, hardware failures, and overuse.
Master Reset: Unplug the printer, then press the Help and OK buttons at the same time, plug it back in. With that it was sorted. 🙂
A factory reset will return your printer’s settings to how they were when you first unpacked it. This guide will help you reset your printer to factory settings.
Press and hold the printer’s start button for at least 10 seconds to reset your printer. Send a print job to the printer before plugging it back in. Once the print job has been sent to the device, plug it back in and your printer should override the ink cartridge settings.
If the power cord is unplugged, the date/time settings will be reset and any documents stored in printer memory will be lost.
Reset button models
It’s usually located on the top right side of your printer, near a digital display screen the printer may have and where earlier the button was on and off the computer is also located. Locate the button labeled Pause/Reset in the row of buttons on the control panel.