How Do I Pair My Plantronics 2xx Bluetooth?

FAQs Jackson Bowman October 18, 2022

How do I put my Plantronics Bluetooth in pairing mode?

Start with the Plantronics device powered on and press and hold the dedicated Bluetooth button until the LED flashes red and blue. Activate Bluetooth on your phone and search for new devices. The Plantronics device name is displayed as “PLT” followed by the model name.

How do I use Plantronics 2xx Bluetooth?

Press and hold the call control button until the indicator light continues to flash red and blue. The headset is now in pairing mode. 3 Use the commands on your phone to find your headset. For most phones, select Settings/Tools > Connections > Bluetooth > Search > 2XXPlantronics.

Why won’t my Plantronics Bluetooth connect to my phone?

Turn the phone back on. Pair the headset with your phone again. If the problem persists, try the headset with a different one to pair the mobile phone. If the problem persists, replace the headset.

Why is my Plantronics headset not connecting?

Charge your headset battery. Often a headset cannot be paired with the mobile phone simply because there is no power. Place your headset on the charger and fully charge it to rule out this possibility. While you’re at it, charge your phone’s battery too.

How do I pair my Plantronics headset to my phone?

How do I reset my Plantronics Bluetooth?

How do I pair my Plantronics Bluetooth to my iPhone?

How do I put my Plantronics Voyager in pairing mode?

Turn on the headset, then put it on. Tap the voice button, then say “pair,” or press and hold the call button until you hear “pair.” Turn on Bluetooth on your phone and set it to listen for new ones devices.

How do I pair my Plantronics C054 headset to my computer?

Press and hold the pairing button on the back of your C054 charging station for 5-8 seconds, then release your finger. You will see the white LED on the front of the charging station start flashing.

How do I connect my Plantronics Bluetooth to my Android phone?

How do I setup my Plantronics headset?

How do you pair my Plantronics Bluetooth to my Samsung phone?

On the Android phone, go to the settings menu. Make sure Bluetooth is turned on, then tap Bluetooth to access settings. Tap Search or Scan (depending on your phone) to allow the phone to find the headset. Once the phone finds the headset, tap PLT_Legend to complete the pairing process.

How do I get my Plantronics wireless headset to work?

How do I pair my Bluetooth headset with my phone?

On an Android device swipe down from the top of the phone and long press the Bluetooth icon. It takes you straight to the Bluetooth menu where you can turn it on and then search for devices. Tap the name of the headphones you want to pair.

Why are my headphones not pairing with iPhone?

Make sure your Bluetooth accessory and your iOS or iPadOS device are close together. Turn your Bluetooth accessory off and on again. Make sure your Bluetooth accessory is turned on and fully charged or plugged into power. If your accessory uses batteries, check if they need to be replaced.

How do I reset my PLT?

Step 1: Press the talk button and the mute button for 5 seconds until the talk indicator starts flashing green. Release both buttons. Step 2: Press and release the talk button again. Step 3: The last step is to unplug the power adapter for 5 seconds and then plug it back in.

Why is my Plantronics headset blinking?

Slow flashing – The headset is active and ready to use. Blinking very fast – The headset is not connected to the base station at all. This always occurs when the base station has no power. If this occurs even though the base station has power, please reset the headset using the link above.



© 2023

We use cookies to ensure that we give you the best experience on our website.
Privacy Policy