To convert a cubic inch measurement to a cubic yard measurement, multiply the volume by the conversion ratio. The volume in cubic yards equals cubic inches multiplied by 2.1433E-5.
46,656 cubic inches is 1 cubic yard (36 inches x 36 inches x 36 inches)
To calculate cubic inches, first measure the length, width, and depth of the box to be measured in inches. Then multiply the length by the width. Finally, multiply the product of the length and width by the depth of the box to find the volume in cubic inches.
Definition of 1 cubic yard ≡ 27 cubic feet ≡ 0.9144³ = 0.764554857984 m³ (1 yard = 0.9144 m). Compared to cubic meter, cubic yard is a smaller unit.
For example, for a 24′ x 24′ x 4″ concrete slab, simply enter 4 in the Thickness/Depth field, 24 in the Width field, and 24 in the Length field. Click Click Calculate. Your answer should be 7.11 yards Note: The Concrete Volume Calculator can also be used to determine aggregate yardage.
A cubic yard is 27 cubic feet. This means that the number of cubic feet will be 27 times greater than the corresponding number of yards. Multiply the number of cubic yards by 27. This will give you the number of cubic feet equal to the specified number of cubic yards.
Length in feet x width in feet x depth in feet (inches divided by 12). Take the sum and divide by 27 (the amount of cubic feet in a yard) . The final number is the estimated amount of cubic yards needed.
A cubic yard is the volume of a cube with a length, width, and height of one yard (3 feet or 36 inches). A cubic yard equals 27 cubic feet. To give you a better idea, the volume of two washing machines is a little more than one cubic meter. Due to their shape, the volume of the dumpster is calculated in cubic meters.
To measure the driveway in cubic feet, multiply the length by the width by the depth. For cubic yards divide the total number of cubic feet by 27. Since a cubic yard of gravel equals 1.13 tons, you can multiply your total cubic yard by 1.13 to convert this measurement to tons.
There are 12 (vertical) layers, each 2.5 cm high. These layers consist of 12 rows of dice with 12 dice each. So each layer has 12 12 unit cubes and since there are 12 layers, there are 12 \times 12) cubic inches in total in cubic feet.
Full Size Pickup Truck
The bed of a standard full size pickup truck has the following dimensions: 8 feet long x 5.33 feet wide x 1.5 feet high. A fully loaded truck of this size holds 2.5 cubic meters of material. The table below shows some additional common capacities of the large pickup truck.
An 80-pound bag of Quikrete concrete mix yields approximately . 60 cu ft. So it takes 45 bags to equal one cubic yard of concrete. If you have a project over 1/2 cubic yard, consider our site mix concrete, especially if you are hand mixing.
One cubic yard of concrete: 4 inches thick – covers 81 square feet.
The concrete slab should be at least four inches thick; it must be thicker when heavy equipment rests on it. Building codes include concrete mix requirements that vary by region. The standards are expressed in terms of “compressive strength” which boils down to the amount of water used in the mix.
For a 20×20×4 slab, you generally need about 4.88 cubic yards or 132 cubic feet or either 294-60 lb or 220-80 lb bags of premixed concrete . You should always buy 5-10% more premixed than you need.
How much does 2 meters of concrete cover. 2 cubic yards of regular weight or mixed or crushed concrete will cover approximately 216 square feet at 3 inches deep, or 160 square feet at 4 inches thick, or 130 square feet at 5 inches deep, or 108 square feet at 6 inches deep.