Press and hold the PAIR button on the transmitter with a paperclip (or similar) for 5 seconds. The LED starts flashing quickly. Note: The PAIR button on the transmitter is recessed to prevent you from accidentally entering pairing mode.
No. The Stealth 600 Gen 2 PS does not offer any Bluetooth compatibility. The headset cannot be paired with Bluetooth devices.
From the main screen of your Android device, tap the Apps button. Then look for Settings and tap on it. Then go to Bluetooth. Make sure Bluetooth is turned on by toggling the power switch to the on position, and then wait for the headset to appear in the list.
1. Go to Settings >> Accessory Settings >> Audio Device Settings. 2. Set the Input Device and Output Device fields to Turtle Beach Stealth 520.
2. Power on your Stealth 600 Gen 2 for PlayStation headset; the LED will start double blinking blue while searching for your station. 3. Within 10 seconds, the transmitter and headset LEDs will turn solid, indicating a successful pairing.
Reset the console and pair the headset again
If your Turtle Beach headset is not working properly but will turn on, the problem may be caused by a connection error between the headset and the console . Then try resetting your console.
Press and hold the connect button on the headset until the LED on the headset flashes quickly. Windows finds the headset and adds it. If your Stealth 600 headset appears in the Other Devices list, it’s ready to use.
Press and hold the power button on the headset until the headset power LED flashes rapidly (5 seconds), then release. Within 10 seconds, the transmitter and headset LEDs will turn solid, indicating pairing was successful.
Make sure your phone’s Bluetooth is turned on. Press and hold the Bluetooth button on the headset until you hear a voice saying “Bluetooth pairing”. You can now connect to your iPhone or Android phone.
Press and hold the Bluetooth button on your headset until the ‘Bluetooth pairing’ prompt plays. Select the headset in your phone or tablet’s Bluetooth settings. The headset and the device are paired via Bluetooth.
The Xbox Wireless Headset connects wirelessly to Xbox Series X|S and Xbox One consoles (pairs to the console in the same way as an Xbox Wireless Controller). The headset can also be connected to Windows, Android and iOS devices via Bluetooth.
Press and hold the connect button on the headset until the headset’s power LED flashes rapidly, indicating the headset is in pairing mode. 3. Within a few seconds, the LEDs on both the headset and the console will be solid. The console displays the message “Headset Paired” and you hear a tone in the headset.
Go to Settings >> Devices >> Audio devices.
Select a USB headset (Turtle Beach Stealth 400 Chat) as input and output device.