However, camera mounts are standardized and you can usually use any tripod with any brand of camera. Note that many tripods have interchangeable heads so you can swap them out (if the tripod mount on your binoculars is different than the tripod mount on the camera). You can even buy a tripod and tripod head separately.
Yes, tripod heads are universal. Most mid- to high-end tripods come with an interchangeable head, allowing you to switch heads depending on your specific photoshoot needs. However, it’s worth noting that many entry-level tripods come with a fixed head, so you can’t mount another head on them.
Most consumer cameras are equipped with 1/4-20 UNC threads. Larger, professional cameras and lenses can be fitted with 3/8-16 UNC threads and a detachable 1/4-20 UNC adapter so they can be mounted on a tripod using either standard.
Tripod heads fit the same standard photography thread sizes used on the tripod. So when you buy a tripod head from a modern photo manufacturer, make sure it fits properly on a standard tripod screw (one of the two sizes above). However, make sure you buy the compatible thread size.
When you start looking for a tripod, you will find that there are thousands of tripods of different brands and prices. That brings us to the topic of this post – are camera tripods universal? The short answer is yes; Camera tripods are universal.
9 Different types of tripod heads for photography.
The tripod screw size is either ¼-20 UNC size or 3/8-16 UNC size for most consumer models. Large tripods use the larger threaded bolts, and some come with smaller threads along with the converter nut.
The point where the tripod head and the device are attached is called the head mount. Most camera gear has a built-in 1/4-20 socket, so most tripod heads use a 1/4-20 male screw as the head mount.
A photo tripod typically has a detachable head with a flat base. A video tripod typically has a cup mount. Bowl mounts come in a variety of diameters, typically 50mm, 60mm, 75mm, 100mm and 150mm. Dish mounts allow for easier adjustment for leveling.
Attach your GoPro to any standard tripod with the tripod mount or quick release tripod mount. Also includes a lightweight mini tripod that attaches directly to your GoPro.
They thread onto a 1/4-20 stud. Pre-HERO8 models still require you to place the camera in a frame or housing. You will also need a GoPro tripod adapter to convert from this threaded stud to the GoPro style mount. (New GoPro models have the three-pronged mount attached to the bottom of the camera body itself.)
Tripod quick release plates are not universal. They are not all the same in terms of size, material or functionality. Some have security latches or locks; some have built-in levels; Some are plastic and some are metal. Quick release plates come in different shapes and sizes.
Ball heads are the most popular tripod heads for photography. The rotating ball allows you to position the camera in almost any way imaginable, and a locking screw lets you lock the ball in position.
For landscape photographers, a ball head or pan/tilt head would probably work best. If you are a wildlife photographer using a long lens I cannot recommend a gimbal head enough. They’re more expensive, but buying a gimbal head was probably one of the best purchases I’ve made as a photographer.
Most cameras have a 1/4-20 (1/4″ diameter, 20 threads per inch) socket for attaching to a tripod. This is a VERY common American thread size and will be found at any American hardware store, Wal-Mart etc. One precaution – make sure the screw you receive is not too long.