A good, sturdy gun safe can weigh in excess of 1,000 pounds. That’s a lot of weight on your second floor floor. You don’t want a safe falling through your ceiling. If you choose to have your safe on the second floor, make sure the floor and ceiling below are tested for load bearing capacity.
Without a doubt, one of the most common questions we get is, “Can I install a safe on the second floor of my house?” The short answer is yes. It is your choice where your safe is installed.
Another place safe from fire would be the second floor of a house above a crawl space. If the first floor of your home is above the basement, the best place to protect your gun from fire is away from the kitchen and other sources of fire.
The Kitchen Pantry – Great spot for a small gun cabinet as thieves aren’t usually interested in the kitchen. This is also a space where people spend a lot of time during the day. In the event of a home invasion, you have quick access to a firearm in the kitchen.
Yes you can! Although a gun cabinet is not only heavy but also bulky, it doesn’t matter when you consider its weight and location on the floor. For gun owners living in high-rise or two-story houses, you’ve probably encountered this problem at least once.
The load capacity of a second story in a home is regulated at 40 lbs. per square foot. For bedrooms, the capacity is 30 lbs. per square foot.
Building codes require the living floor to support a live load of 40 psf (pounds per square foot). For your safe, which weighs 300 pounds, it needs a footprint that covers an area of 300/40 = 7.5 SF (square feet).
The safest place to install a safe would be at the corner where two exterior walls meet. This provides the most protection and support for a heavy safe. In a multi-level house, it is best to keep the safe on the ground floor.
Can gun safes be stored in the garage? Yes, it is still possible to place gun cabinets in the garage, but you will have to deal with some issues such as extreme temperatures, fire hazards and easy access. Considering these risks will help you safely install a gun safe in the garage.
When you’re not holding the gun, you still need to think about safety. Use a California-approved firearm safety device on the gun, such as a B. a trigger lock or a cable lock so that it cannot be fired. Store uncharged in a sealed container, e.g. such as a California-licensed locker or gun safe.
Should I put the safe in the basement? The basement is one of the safest places for your fingerprint gun safe as there are no windows and most people don’t go there very often. It’s also a great place to store items like ammo, ammo, firearms, guns & more.
Let’s say you have a three foot wide safe that weighs 1,000 pounds and your floor joists span 12 feet (which is typical). This 3ft by 12ft section of floor was designed to safely support a payload of 3 x 12 x 40 PSF, which equates to 1,440 pounds.
These can be the size of a microwave or even a mini fridge. As a point of reference: Gardall Safe Corp’s most popular safe. weighs approximately 85 pounds and measures approximately 17 inches on all sides. Depending on your needs, safes can be significantly larger and weigh up to 300 pounds.
Internal dimensions: 53.40″H x 38.40″W x 19.90″D. Weight: 542 lbs. Fire rated at 64+4 guns. Fire rating: 1400°F for 30 minutes .
Excessive weight on a floor
However, if load-bearing supports are not properly installed, it can cause a floor to collapse. In addition, some ground collapses can be caused by excessive numbers of people standing or jumping in an already weak area of a floor.
This means the joists can support a minimum payload of 40 pounds per square foot. However, if you consult the 50 lbs per sq ft payload/10 lbs per sq ft dead load chart, you can see that the span of the beams would need to be reduced to 11 ft 11 in to safely support heavier weight.
Most residential floors are rated 40-50 pounds per square foot by default unless more is planned. You have 60 PSF deadload and 7 PSF payload assuming the cabin floor distributes the payload over the entire 36 square feet.