Spyder Victor features an all-aluminum body, top cocking bolt, tool-less striker-plug design, 10″ micro-ported barrel, non-slip rubber grip plate, two-finger trigger, external speed control, steel-braided hose line, an in-line bottom-line ASA operated with CO2 or compressed air.
Paintball guns run on compressed gas – air or CO2 – from tanks filled to 3,000-4,500 pounds per square inch (psi). Refilling these tanks requires heavy-duty compressors and equipment. Although compressed air may perform better than CO2, few stores have the ability to properly refill air tanks with it.
Not only is compressed air infinitely better to store and fill than CO2, it also vastly improves the functionality of a paintball marker. Compressed air for paintball markers allows them to operate at a reduced pressure, which has many benefits in terms of efficiency.
The Bottom Line
The Spyder Victor is Kingman’s most affordable and basic paintball gun on the market, but it holds its own against similar guns. It’s not particularly accurate, fast, or consistent, but the Victor is cheap, easy to use, highly upgradeable, making it a great first weapon for beginners.
The main benefit of compressed air is consistency. The more consistent pressure results in much more consistent performance. Compressed air, unlike CO2, is only slightly affected by temperature, making it great for cold weather and electronic guns. All-day compressed air fills are calculated on most paintball fields.
Because compressed air tanks are the only containers designed for compressed air, there are so many variables between the compressed air tank and the CO2. It is virtually impossible to fill a CO2 tank with compressed air without exposing yourself (and those around you in paintball) to serious danger.
The Victor uses standard . 68-gauge paintballs, making it easy to find paintballs at your local paintball park or sporting goods store. If you are looking for an affordable paintball starter gun, the Spyder Victor is the #1 most recommended starter gun we have available!
You can’t shoot a paintball without CO2 or compressed air. Regardless of whether the marker used is mechanical or electro-pneumatic, it uses propellant to propel the paintball out of the barrel.
HPA is a better investment in the long run. The benefits over CO2 in all-weather performance are worth the extra cost. Also, an HPA tank is a piece of equipment that can be transferred to any marker you upgrade to. Determine what your equipment requirements and skill level are, and choose accordingly.
There are two main types of gas used as a propellant on a paintball marker. CO2 and HPA (also known as compressed air).
Paintball tanks need to be water tested again because the tank expires about every five years and you want to be sure the tank isn’t depressurized. To have your tank water tested again, you should take it to a paintball gun specialist.
Paintball guns shoot in feet per second (FPS) and that’s how we measure velocity. The safe speed is between 220 and 280 FPS. Paintball goggles are rated for 300 FPS and paintballs themselves are designed to shoot optimally between the same ranges.
www.homedepot.com , which isn’t enough as your paintball tank needs at least 3,000 PSI to fill. You need a specialized, high-performance option like the Orion Motor Tech air compressor or the cheaper GX PCP hand pump. The Orion Motor Tech and GCX PCP can inflate your tank to 4,500 PSI.